Depanel Master
( formerly OZO Support, LLC )
Specializing in Customized OZO Routers
Made in Colorado     Made in USA
    Our Maytag © Warranty    


OZO Socket Insertion System


Front Full View
More pictures here
We have a custom drill and socket insertion machine for sale.   It has been used by Storage Tek in Colorado very successfully for many years. It is in excellent functional condition.

This upgraded, fully supported, OZO Drill/Router is capable of drilling and inserting sockets for
Agilent / HP 3070 ( Single / Dual )
but also any other fixtures, such as,
Teradyne or GenRad.

This is a fully functional CNC drill / router.
( 2.5 axes )

Once the drilling process is completed, typical cycle times for insertion & seating are :
100 MIL or 75 MIL sockets :
      under 5 seconds
Personality Pins :
      under 3 seconds

The files generated by the Agilent / HP 3070, are read directly by the very flexible OZO software, which can swap axes, mirror and offset the drill hole pattern to locate the pattern properly on either side of the fixture.

This machine is equipped beyond our standard Model 18HS with Stainless Steel Couplers and a more powerful Power Supply to drive the Servos and heavier weight on X & Y axes.

We guarantee your satisfaction with this quality OZO machine.
- Table work area large enough for
      Agilent / HP 3070 Dual
- Vibratory Bowl for Personality Pins
- Vibratory Bowl for Sockets :
      100 MIL & 75 MIL
- Manuals, Training and full Support available
- Spare Spindle Model 2050 - up to 45,000 RPM
      (high speed spindle also available)
- ATC - Automatic Tool Change - 14 positions
- Spindle is completely under control :
      Feed & Speed, 2 kinds of Peck drilling
- Dimensions :   5' deep X 5'6" wide X 8'5" tall
      (or 60" x 66" x 101")
- Weight :   about 3000 pounds
See Sales Brochure for similar more common
      OZO Model 18HS, although :
- XY Size Limits are larger :
      X Limit 32"
      Y Limit 26"
- XY Max Speeds are slower
      due to the weight of the X & Y axes
      X Ramped speed 200 IPM
      Y Ramped speed 400 IPM

This custom OZO Socket Insertion System
uses all the same electronics and hardware
as the more common OZO Model 18HS.
Complete support is available : Warranty, Spare parts, Training, Software and On-Site Service Contract.
If any custom modifications are needed we are capable of changing the program or hardware to accommodate your needs.

For instance : The program could be modified so that : 25 Mil, 39 Mil & 50 Mil sockets could be manually inserted and then pressed in by this machine.

Socket Insertion System in action

Operator is enabled to make clear decisions
during the operations of Drilling and Inserting.

In the event of a malfunction, such as :
- running out of sockets
- malformed socket that gets stuck
Sensors are verifying proper functioning
and if necessary,
clear appropriate Error messages are displayed
with options for recovery and continuation.

Additional sensors and error messages
can be easily added.



Sample of Windows-like OZO Control program :
Job Setup Selection Menu :
Drill Top Plate
Drill Center - Top
Drill Probe Plate - Top
Drill Center - Back 50/75/100 MIL
Drill Probe Plate - Back 50/75/100 MIL
Drill Probe Plate - Back Personality Pin
Insert Personality Pins
Insert Sockets 100 MIL
Insert Sockets 75 MIL

Operator Menus are fully customizable to simplify for Operators and minimize errors and yet extremely flexible for Supervisor / Engineer to specify complete control.



Three Security levels :
- Operator : restricted to selection a job & running it
- Supervisor : for engineering design & setup
- Service : for OZO personnel fine tuning only


We also have other ATE Fixture build supplies - just ask :

more ATE supplies


Email (best) : DepanelMaster1 (at) gmail.com                                 Depanel Master                                 Email : OZOSales (at) gmail.com
Phone:   +1   3 0 3 . 5 8 7 . 3 3 4 5 (leave message)                                 Contact Us                     Hablamos Espanol & Falamos Portugues & English